(F/UTP)Data Transmission Cable for Local Networks 

with central-element and shield, Category 6 

Conductor materialBare, solid copper conductor, Ø 0,55mm

 (AWG 24/1) 

core insulation                    SFS Polyethylen

Overall shielding                 aluminium foil with a tinned drain wire Ø 0,5mm

screen                                 tinned copper braiding

layer                                    plastic foil 

plastic laminated aluminium foil 

PVC-sheath or with halogen free sheath 

Standards:                           ISO/IEC 11801 2.Edition 

                                            EN 50173-1 

                                            TIA/EIA 568-B.2 

                                            IEC 61156-5 

                                            EN 50288-5-1 

Technical data: 

Temperature range             -0°C TO  +60°C （moved）

Loop impedance                19,0 [Ohm/100m] 

Capacity                             max. 50[nF/km] 

Nom. Velocity of propagation        NVP nom. 77,0

Attenuation                        100,0+/- 22[Ohm] 

couplingresistance             10[mOhm/m] 

Capacity coupling              150[pF/100m]

Insualtion resistance          >5[GOhm/km] 

Test voltage at 50 Hz         700[VAC] 

Application:

In the horizontal cabling as an installation for laying cable in cable channels and pipes inside of telecommunications equipment and data systems to 350 Mhz. Installation is very easy because of a central element (cross) no individual shield is required. 

Usable for: 10Base-T, 100 Base-T, 1000 Base-T, CDDI/TPDDI, ISDN, ATM 155 Mbit/s, TP-PMD 125 Mbit/s, Token Ring 4/16 Mbit/s.